3xLOGIC VIGIL Server - Manual (Page 59)

8 Settings – Camera Setup Tab
VIGIL Server is a diverse software application that interfaces with a wide variety of hardware configurations. A com-
prehensive set of customization controls is available to configure the VIGIL Server as required. This section will
describe the available settings in detail.
Opens the VIGIL Server Settings window, which can also be accessed via the main menu:Tools | Settings.
When making changes, click the Apply button to save and continue making changes, or click OK to save
and return to the main VIGIL Server window. Click Cancel to close the settings without saving changes.
The Camera Setup settings allow configuration of the camera image, resolution, recording speed, buffering and
CODEC. Network cameras are also enabled under the Camera Setup tab.
Click the Apply to All button at the top of the window to apply the same settings to all cameras. Settings
that will be applied to all cameras will be indicated by BOLD headings.
Note: Only changes made after clicking Apply to All will be applied to every camera.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 55