3xLOGIC VIGIL Server User Manual
Page 156
Advertising
Output Relay Settings
Select Outputs from the top of the Relays/Alarm tab page.
Select an Output number from the drop-down. Select Edit... to configure Output settings.
Configure Mode and Dwell time under the Settings section and assing the output to a camera via the Cameras list.
Relay Override
This logical function is used to override a relay when another relay is in use. This will cause a relay which would nor-
mally trigger to remain inactive when another specific relay has already been tripped.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 152
Advertising