3xLOGIC VIGIL Server - Manual (Page 14)

3.3 TV Output Switch
With supported hardware, VIGIL Server can display a number of video feeds to analog monitors. Outputs with Mul-
tiplexor support can be configured as a multiplexed video output similar to the Live Viewer. The number of analog out-
puts and multiplex analog outputs varies between models; please check the VIGIL Server model specification for
details.
Note:Capture Card Types with multiplex analog output features available include:
VIGIL Server200X, VIGIL Server100X, VIGIL Server50X – one monitor output with multiplex support and one monitor
output with single camera support
PROSERIES – output cards are available for use with this capture card type, all with multiplex support
The TV Output Switch changes the camera displayed on the monitor by selecting the camera number. If
no monitors are selected, click on the desired monitor number before selecting the camera number.
On systems supporting Mux/Analog Out, you can also select the Setup Analog Out Multiplexermenu item,
which opens the Analog Out Multiplexer window (see below).
To arrange cameras within the selected display grid, right-click on a par-
ticular position and select a camera. Camera positions are configured
separately for each grid style.
Undoes any layout changes that have been made
since the Analog Output Multiplexer window was
last opened.
Toggles captions on and off for the Analog Output
Monitor video feeds.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 10