3xLOGIC VIGIL Server - Manual (Page 86)

During Alarm
Select what action to apply during the DIO Alarm.
Mode Select Patterns, Presets or Tours from the Dropdown box.
Name/Number Enter the Name or Number of the Pattern, Preset or Tour.
After Alarm
Select what action to apply after the DIO Alarm has ended. To do nothing after the alarm, select Disabled from the
Mode Dropdown.
Mode Select Disabled, Patterns, Presets or Tours from the Dropdown box.
Name/Number Enter the Name or Number of the Pattern, Preset or Tour.
Dwell Time
The amount of time from when the DIO Alarm is triggered until the After Alarm event occurs. If Dwell
Time is not checked the After Alarm event will trigger when the DIO Alarm ends.
Control Interface
Enables the Push Button Directional controls for the camera in place of the virtual joystick.
Region Control is a setting that is only accessible on certain PTZ camera models. It is an alternative to
the traditional push button, joystick or on-screen drag method for controlling PTZ movement. Region
Control enables you to simply click on-screen to shift the cameras line-of-sight toward the region that
has been clicked.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 82