3xLOGIC VIGIL Server - Manual (Page 37)

Markers
During playback, if only a sub-range of the loaded footage is of interest it can quickly be selected by using Markers. To
use Markers, select the Markers tab from the Advanced Features section.
Start / End Range
Position the footage navigation slider at the beginning of the sub-range and click the Start Range button.
You will notice a small marker appear below the starting point. Next, navigate to the end of the sub-range
and click the End Range button.
Clear
Removes the sub-range markers. If the sub-range is cleared when the View button is latched on, the play-
back will return from the sub-range to the fully loaded footage.
View
Loads the sub-range for playback. The playback information will indicate that a sub-range is currently dis-
played. All of the playback controls will operate on only the sub-range of footage.
Note: If multiple cameras are loaded for playback in Multi-Screen mode, each camera can have its own
unique sub-range of footage.
Note: If a sub-range has been defined, only the sub-range will be saved when video is exported.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 33