3xLOGIC VIGIL Server - Manual (Page 15)

3.4 Live Viewer Display Controls
Changes the Live Viewer to full screen mode. To exit full screen mode, click the X in the bottom right
corner or press the escape key on the keyboard.
This mode may only be accessed via right click on the live
viewer display depending on your VIGIL Server's capture card.
Click the Restore Original Display Layout button to return to the previously displayed layout or to the lay-
out where the last camera change was made.
Note: To reload default window sizes and locations, select Tools | Reset Window Positions from the menu,
or select Reset Window Positions from the Tools button drop-down menu. To reset all camera positions to
default for the current layout, right-click on any camera feed within that layout and click Reset To Default.
Toggles captions on the Live Viewervideo feeds on and off.
Note: Captions are not included in the recorded footage.
Toggles the display size of the camera when in Single Live View display mode.
When in Hardware Rendered mode, some of the options differ from Software Rendered mode. For example, the right-
click context menu only has the options of Copy, FullScreen and QuickSearch.
The following buttons are available in the Live Viewer window for Hardware Rendered mode:
Cycles through which camera is displayed in the first position in the live viewer window. Clicking allows
you to select a camera directly.
Note: When in Single Live View display mode, the button PAGE is replaced with CAM, where the function
is to change between cameras rather than pages of cameras.
Toggles captions on/off the Live Viewer video feeds.
Turns on/off all live video feeds. This feature does not affect recording.
Certain capture cards can change between Hardware Rendered and Software Rendered mode. Instead of entering the
settings, you can click the arrow beside the Live button on the main VIGIL Server toolbar to select one of these two
modes.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 11