3xLOGIC VIGIL Server - Manual (Page 60)

Settings
Brightness Adjusts the brightness of the video footage.
Contrast Adjusts the contrast of the video footage.
Sharpness Adjusts the sharpness of the video footage.
Hue Adjusts the color of the video footage.
Saturation
U and V
Adjusts the U and V color difference signals used in YUV color format for the video footage. Note that not
all cameras use a YUV color format, in which case, adjusting the Saturation U slider will adjust the color
saturation while the Saturation V slider will have no effect.
Resolution
Select a recording resolution from the drop-down menu. Options range from 352x240 to 704x480 res-
olution. If a network camera is enabled on the channel, this option will not be available.
Recording
Use the drop-down menu to enable or disable recording of the selected camera. If the selected camera is
not available, Inactive will be displayed here.
Pre Buffer
The number of seconds of footage to record prior to a motion detection or alarm event. For JPEG Camera
streams the recommended setting is 1. For H.264 Camera streams it is recommended to set the pre
buffer to the key frame rate.
Speeds
Opens the Recording Speed window. The recording
speed can be set individually for Constant, Motion
and Alarm Recording Mode. Use the drop- down
menu to select the desired number of frames per
second (fps).
Note: Network cameras will often record and play
back at a slower rate than what was set in the
Recording Speed window, depending on the band-
width and camera.
Reset ‘Cam#’ to
Default
Returns the camera settings to their default values.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 56