3xLOGIC VIGIL Server - Manual (Page 155)

Email Notification
When enabled, an email is sent when an alarm is triggered. Click Email Settings... to configure the email recipients
and contents. Enter the appropriate details for the email that will be sent. To add, edit, or remove email recipients,
use the Recipients section and the appropriate buttons. Enabling Attach Still Shot will add a still image of the selected
cameras to the outgoing email. This image is from the beginning of the triggered alarm event.
Note: For email options to function properly, a valid SMTP server must be set up correctly in the VIGIL Server Settings
tab.
Output Relay
Select the Output Relay to trigger when the Digital Input Alarm is triggered. The Output Relay can be set to
Latched or Momentary.
Notification Settings
Popup Alarm Screen When a Digital Input alarm is triggered, opens an Alarm window on the VIGIL Server.
Monitor Output
To display the Camera feed associated with the Digital Input on a Monitor during an alarm,
choose the Monitor Number or All Monitors from the Drop-Down.
Suppress Email Noti-
fication
This option, which will only work in conjunction with enabling the Popup Alarm Window, will pre-
vent a flood of email alerts being sent out. It will only send out one email alert until the alerts
have been acknowledged on the Popup Alarm window. If alerts have been set to auto acknowl-
edge, it will send out an email after each period of auto acknowledgement has passed.
Audio Notification
Enables audio notification which plays a system beep or wave file when an alarm is triggered.
When Wave File is selected, click … to browse for the .wav file that will be played.
Remote Client Retry Settings
Connection Attempts The number of times to retry sending an alarm to a Remote Client.
Retry Delay The number of seconds to wait between connection attempts.
3xLOGIC's VIGIL Server 7.1 User Guide
Pg. 151