ADLINK ACL-8112 Series - Manual (Page 11)

Introduction
• 3
1.1 Features
The ACL-8112 series Enhanced Multi-function Data Acquisition Card
provides the following advanced features:
•
AT-Bus
•
16 single-ended or 8 differential analog input channels for ACL-
8112DG/HG, 16 single-ended for ACL-8112PG
•
Bipolar or unipolar input signals for ACL-8112DG/HG, bipolar for ACL-
8112PG
•
Programmable gain
•
High gain for ACL-8112HG:( x0.5, x1, x5, x10, x50, x100, x500,
x1,000)
•
Normal gain for ACL-8112DG (x0.5, x1, x2, x4, x8 )
•
5 Levels programmable gain for ACL-8112PG (x1, x2, x4, x8, x16),
x0.5 gain can be set by jumper
•
On-chip sample & hold
•
Two 12-bit monolithic multiplying analog output channels
•
16 digital output channels
•
16 digital input channels
•
3 programmable 16-bit down counters
•
Programmable sampling rate of up to 100KHz
•
Three A/D trigger modes: software trigger, programmable pacer
trigger, and external pulse trigger
•
AT interrupt IRQ capability: 9 IRQ levels (IRQ3~IRQ15) are jumper
selectable
•
Integral DC-to-DC converter for stable analog power source
•
37-pin D-type connector
•
Compact size: half-size PCB