8 termination board support, 1 connect with din-100s, 2 connect with din-502s – ADLINK PCIe-7300A User Manual
Page 28: Termination board support, Connect with din-100s connect with din-502s
18
Installation
2.8
Termination Board Support
The cPCI/PCI/PCIe-7300A can be connected with two termination
boards: DIN-100S or DIN-502S. The functionality and connections
are specified as follows.
2.8.1 Connect with DIN-100S
The DIN-100S is a direct connection for the add-on card that is
equipped with SCSI-100 connector. User can connect this daugh-
ter board by a 100-pin SCSI type cable (ACL-102100) to the cPCI/
PCI/PCIe-7300A. It is suitable for the applications of 32-bit digital
input or 32-bit digital output.
2.8.2 Connect with DIN-502S
The DIN-502S with the cable ACL-10252 separates the 100-pin
SCSI connector into two 50-pin SCSI connectors. One 50 pin con-
nector is for pin 1 - 25 and pin 51- 75 of CN1 while the other one is
for pin 26 - 50 and pin 76-100 of CN1. That means the DIN-502S
and the ACL-10252 make users easy to connect the 16-bit digital
inputs and 16-bit digital outputs by using two 50-pin daughter
boards respectively. The independent wiring of 16-bit DI and 16-bit
DO let users convenient to setup and maintain his systems.