ADLINK ND-6013 - Manual (Page 44)

36 • Command Set
Special Commands
Read Command Leading
Code Setting
~(Addr)0 ALL 3-51
Change Command
Leading Code Setting ~(Addr)10(C1)(C2)(C3)
(C4)(C5)(C6)
ALL 3-53
Set Host Watchdog /
Safety Value ~(Addr)2(Flag)
(TimeOut)(SafeValue)
ALL 3-55
Read Host WatchDog /
Safe Value
~(Addr)3 ALL 3-57
Host is OK ~** ALL 3-58
Note: “ALL” means for ND-6011/D, ND-6012/D, ND-6013, ND-6014D,
ND-6017 and ND-6018.
(1) This function only support on F/W version above A4.30.
(2)These two functions only support between F/W
versionA3.05 to A4.52.
(3)These two functions support on F/W version above B4.60
of ND-6018 and F/W version above A4.60 of ND-6011.
(4)These two functions support on F/W version above B1.31
of ND-6018 and F/W version above C4.60 of ND-6013.