Labconco Bulk Powder Stations 3962622 User Manual
Page 15
Advertising
![background image](/manuals/738616/15/background.png)
Chapter 3: Getting Started
Product Service 1-800-522-7658
11
3.
Use the bolts and screws detailed below to secure the stainless steel
work surface to the lift stand from underneath; these bolts and screws
are provided and shipped with the XPert Bulk Powder. The work
surface has concealed fasteners for the bolts and screws located on the
underneath side. The long bolts are used to pass through the 2" sq. tubing
and the shorter fasteners are only used in the middle near the hole in the
work surface.
Fastening Hardware for Step 3:
1.
1880740, Quantity 8, Hex Bolt ¼-20 x 2.5
2.
1880708, Quantity 3, Hex Head Screw ¼-20 x 0.5
Advertising
This manual is related to the following products: