Labconco Bulk Powder Stations 3962622 - Manual (Page 25)

Product Service 1-800-522-7658 21
Chapter 5:
Using Your Enclosure
Please see Figures 5-1 through 5-9 for using your XPert Bulk Powder Enclosure
effectively.
Planning
 Thoroughly understand procedures and the equipment required before
beginning work.
 Arrange for minimal disruptions, such as room traffic or entry into the
room while the enclosure is in use.
Start-up
 Turn on exhaust system and light if so equipped.
 Only raise the sash for loading the enclosure and then return sash to the
working position.
 Allow the enclosure to operate for 1 minute prior to starting procedures.
 Wear a long sleeved lab coat, sleeve covers and double gloves. Use
protective eyewear. Wear a protective mask if appropriate. Consult your
Safety Officer for additional personal protective equipment
recommendations.