Labconco Bulk Powder Stations 3962622 - Manual (Page 28)

Chapter 5: Using Your Enclosure
Product Service 1-800-522-7658 24
Figures 5-9
Unloading Materials and Clean Up
 Objects in contact with contaminated material must be surface
decontaminated with an appropriate solvent before removal from the
enclosure.
 The perforated baffle may be tilted down to clean behind it as shown in
Figure 5-9.
 All open trays, weigh vessels or containers should be covered and wiped
down before being removed from the enclosure.
 Wipe down work surface, retaining rings and bands.
 Upon completion of work, the enclosure should be allowed to operate for
two minutes undisturbed, to purge airborne contaminants from the work
area.
 With the pad soaked in a decontamination solution, a duster may be used to
access hard to reach places.
Shutdown
 Return the perforated baffle to the up position and fasten with two
thumbscrews securely.
 Turn off the exhaust system and light if
provided.
Thumb
Screws