Labconco Bulk Powder Stations 3962622 - Manual (Page 22)

Chapter 4: Performance Features and Safety Precautions
Product Service 1-800-522-7658 18
4.
Transfer Cart with Transfer Plate
The transfer cart engages automatically to the lift stand and the transfer
plate lifts off the cart with the source container. The transfer cart does not
interfere with the weighing process because it is stored under the stand and
latched in place. The transfer cart and transfer plate keeps the container in
place and locates it properly.
5.
Automated Lift
The automated lift securely lifts the transfer plate and source container to
the correct height. A photoelectric eye automatically stops the source
container below the work surface at the correct height where it is easy to
see and access the powder (12" travel and 350 pounds capacity).
6.
Retaining Rings (Required Accessories)
Retaining rings are used to secure the inner source container bags to the
work surface. The retaining rings are available in various diameters up to
19.6" dia. A lower retaining ring may be used to secure the safety sleeve on
the source container when the inner source container bags are undersized.
7.
Safety Sleeve
The safety sleeve is a disposable (or can be cleaned) polyethylene bag,
open on both ends, that secures the outer diameter of the source container
to the work surface. It provides an additional level of safety from spills
and/or residual powders inside the source container. The safety sleeve is
reusable and easily cleaned. It is attached to the source container and lower
retaining ring creating a seal between the work surface. Square or round
containers are easily fitted with the safety sleeve. See Chapter 5 for
illustrations.
8.
Retaining Bands
The elastic retaining bands secure the safety sleeve and inner source bags
to the work surface. The retaining band also secures the safety sleeve to the
outer perimeter of the drum. These retaining bands are reusable and easily
cleaned. See Chapter 5 for illustrations.
9.
Stainless Steel Work Surface with Trough
The easy-to-clean stainless steel work surface incorporates a front spill
trough to prevent escape of contaminants.
10.
Increased Depth and Height
The XPert Bulk Powder Enclosure has a 30" interior depth and 32" interior
height for large equipment.