Labconco Fiberglass 30 Laboratory Fume Hoods 3030005 - Manual (Page 24)

20
Product Service 1-800-522-7658
Chapter 4: Performance Features and Safety Precautions
1. Unique sash provides maximum visibility of
28" high while conserving energy by limiting
sash travel to 20". Vertical-rising sash may be
raised from a closed to 20" operating height.
Exhaust volume, and blower sizing is based on
the 20" height.
2. By-pass airflow design ensures relatively stable
face velocities.
3. Large usable interior work depth and
interior height of 36" provides ample working
space.
4. Baffle (not shown) directs airflow to the rear of
the interior to provide efficient airflow. The
baffle may be removed for cleaning purposes
only.
5. Lift-Away™ front panel provides easy access
to electrical wiring, and sash weights.
6. Incandescent lighting provides ample
illumination inside the fume hood. No lighting
is provided on explosion proof models.
7. Low mounted, factory-wired light and blower
switches are ADA compliant. No switches are
provided on explosion-proof models.
8. Curved Air Foil allows air to sweep the work
surface for maximum containment.
9. Corner posts provide maximum visibility and
the flexibility to add services after installation.
10. All hoods are factory prepared for up to 3
service fixtures. Field installed by removing
side access panel.
11. Removable side access panel for servicing
valves and electrical connections.
12. All hoods are factory prepared for one
electrical duplex. A duplex can be field
mounted on the right corner post. Receptacles
are field-wired to the single point junction box.
13. Shipped fully assembled and eliminates the
need for costly onsite assembly.