Labconco Fiberglass 30 Laboratory Fume Hoods 3030005 - Manual (Page 37)

33
Product Service 1-800-522-7658
Chapter 6: Maintaining Your Fiberglass 30 Fume Hood
Routine Service Operations
Front Panel Removal:
1. Simply lift the front panel up and then away from
the hood to provide access to the top.
Changing the Incandescent Lamp:
1. Turn light switch to “OFF”.
2. Raise the sash and reach inside the fume hood to
unscrew the clear glass globe that protects the
incandescent bulb.
3. Install the new incandescent bulb and then reverse
the removal procedure.
Your Next Step
After you understand the maintenance procedures, you
are ready to proceed to Chapter 7: Modifying Your
Fiberglass 30 Fume Hood.