Labconco Fiberglass 30 Laboratory Fume Hoods 3030005 - Manual (Page 6)

2
Product Service 1-800-522-7658
Chapter 1: Introduction
About This Manual
This manual is designed to help you install, use, and
maintain your laboratory fume hood. Instructions for
installing optional equipment on your hood are also
included.
Chapter 1: Introduction provides a brief overview of
the laboratory fume hood, explains the organization of
the manual, and defines the typographical conventions
used in the manual.
Chapter 2: Prerequisites explains what you need to do
to prepare your site before you install your laboratory
fume hood. Electrical and service requirements are
discussed.
Chapter 3: Getting Started contains the information
you need to properly unpack, inspect, install, and
certify your laboratory fume hood.
Chapter 4: Performance Features and Safety
Precautions explains how the laboratory fume hood
operates and the appropriate precautions you should
take when using the fume hood.
Chapter 5: Using Your Fiberglass 30 discusses the
basic operation of your fume hood. Information on
how to prepare, use and shut down your fume hood is
included.
Chapter 6: Maintaining Your Fiberglass 30 explains
how to perform routine maintenance on your fume
hood.
Chapter 7: Modifying Your Fiberglass 30 explains how
to modify the fume hood or add accessories.
Chapter 8: Troubleshooting contains a table of
problems you may encounter while using your
laboratory fume hood including the probable causes and
suggested corrective actions.