Changing preset parameters, Storing changed preset parameters – Rocktron Replifex User Manual
Page 39
36
Operating the Replifex
™
Step 1
Turn the FUNCTION SELECT control to select the function heading which contains the
parameter(s) you wish to change.
Changing preset parameters
SSSS REVERB SSSS
1
Turn the PARAMETER SELECT control to the specific parameter you wish to change.
REV DECAY
59
Turn the PARAMETER ADJUST control to alter the parameter value. The LED above the
STORE button will light, indicating that the preset has had a parameter altered from its stored
value.
REV DECAY
32
Step 3
Step 2
Step 4
The COMPARE button may now be pressed to compare the sound of the stored parameter
value to the sound of the altered parameter value.
REV DECAY
59
4
3
2
5
Storing changed preset parameters
Step 5
While viewing a function or parameter title, press the STORE button to store the altered
parameter(s). "STORED" will flash briefly on the display.
STORED