Rocktron Replifex - Manual (Page 56)

53
MIDI Dump/Load
Any or all of the Replifex ™ presets may be dumped to a sequencer or another Replifex ™ via system
exclusive messages. The information exchanged when performing a MIDI Dump consists of parameter
values, title characters and controller assignment information. When dumping a single preset into another
Replifex ™ , the dumped preset may be loaded into any preset location on the receiving Replifex ™ .
To dump a single Replifex ™ preset into another Replifex ™
Operating the Replifex ™
Connect a standard MIDI cable from the MIDI OUT of the transmitting Replifex ™ to the
MIDI IN on the receiving Replifex ™ .
Step 1
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving Replifex ™
back to the MIDI IN of the transmitting Replifex ™ .
Step 2 Turn the FUNCTION SELECT controls on both the transmitting and receiving Replifexes
until "MIDI DUMP/LOAD" is displayed on each.
MIDI DUMP/LOAD MIDI DUMP/LOAD
Step 3 Turn the PARAMETER SELECT control on each unit one step clockwise to "PR DUMP/
LOAD".
1 PR DUMP/LOAD 1 PR DUMP/LOAD
RECEIVING REPLIFEX
RECEIVING REPLIFEX
TRANSMITTING REPLIFEX
TRANSMITTING REPLIFEX