Rocktron Replifex - Manual (Page 72)

69
Step 1
Selecting a Configuration
Turn the FUNCTION SELECT control fully clockwise to "CONFIG SELECT".
The Replifex ™ allows you to select which configuration - Classic or Rotary - is active for the current
preset.
CONFIG SELECT
Operating the Replifex ™
Step 2 Turn the PARAMETER SELECT control to access the "XXXXXXX SELECTED"
parameter.
Step 3 Turn the PARAMETER ADJUST control to select the desired configuration.
ROTARY SELECTED
Step 4 Press the STORE button to save the selected configuration. "STORED" will flash briefly on
the Replifex
™ display.
STORED
CLASSIC SELECTED
4 3 1 2