Rocktron Replifex - Manual (Page 62)

59
Factory Restore
The Factory Restore function allows you to restore altered Replifex ™ presets to their original condition
as shipped from the factory. Either the entire Replifex ™ memory can be restored, a single preset can be
restored to any preset location, or the controller information alone can be restored.
Step 1 Turn the FUNCTION SELECT control clockwise to "FACTORY RESTORE".
FACTORY RESTORE
Step 2 Turn the PARAMETER SELECT control one step clockwise to "RESTR 1 TO 1". The
number on the left is the original factory preset number to be restored. The number on the
right is the preset location that the preset will be stored into.
RESTR 1 TO 1
Factory preset to be restored Preset location to store into
Step 3 Turn the PRESET control to select the factory preset to be restored.
RESTR 98 TO 1
Step 4 Turn the PARAMETER ADJUST control to select the preset location to store the restored
preset into.
RESTR 98 TO 22
Restoring a single factory preset:
Operating the Replifex ™
3 4 5 2 1