Rocktron Replifex - Manual (Page 57)

54
Operating the Replifex ™
Step 4 Turn the PRESET control on the transmitting Replifex ™ to the preset that is to be dumped into
the receiving Replifex ™ . As the PRESET control is turned, the preset number will be dis-
played in the first three characters of the display.
32 PR DUMP/LOAD
Step 5 Use the PRESET control on the receiving Replifex ™ to select the preset location to store the
received preset. (The preset currently stored at the selected location will be lost when the new
preset is received, therefore caution should be used when selecting a preset location.)
122 PR DUMP/LOAD
Step 6 To initiate the dump, press the STORE button on the transmitting Replifex ™ . The transmitting
Replifex ™ will display the preset number being dumped and "DUMPED". The receiving
Replifex ™ will display the preset location being stored to and "RECEIVING..." while it
receives and stores the preset parameters and title.
122 RECEIVING... 32 DUMPED
After all the information for the dumped preset is stored, the receiving Replifex ™ will display
"LOADED". The receiving Replifex ™ also recalls the loaded preset at this time so that it may
be verified.
122 LOADED
Note: If there is an error in transmission, the unit will display "RECEIVE ERROR". Should
this occur, check connections and try again. If other errors occur, check the Error
Messages chart in the Appendix.
RECEIVING REPLIFEX
TRANSMITTING REPLIFEX RECEIVING REPLIFEX
TRANSMITTING REPLIFEX
RECEIVING REPLIFEX