Applied Motion SV7-C-CE - Manual (Page 3)

3
SV7 Hardware Manual 920-0012F
12/18/2014
Introduction
Thank you for selecting an Applied Motion Products motor control. We hope our dedication to
performance, quality and economy will make your motion control project successful.
If there’s anything we can do to improve our products or help you use them better, please call or
fax. We’d like to hear from you. Our phone number is (800) 525-1609, or you can reach us by fax
at (831) 761-6544. You can also email [email protected].
Features
• Programmable, digital servo motor driver in compact package
• Operates from a 24 to 80 volt DC power supply
• Operates in torque, velocity or position mode
• Accepts analog signals, digital signals and RS-232 serial commands
• PID position loop with acceleration and velocity feedforward
• Highly responsive digital “DQ” current loop
• Optional RS-422/485 communication
• Optional CANopen DS301 communication with DS402 motion control
• Optional 100 Mbit Ethernet communication using SCL and Q
• Optional Ethernet/IP communication
• Quadrature encoder feedback
• Motor current up to 7 amps rms continuous, 14 amps peak
• Eight optically isolated digital inputs
• Four optically isolated digital outputs
• Two ±10 volt analog inputs for torque, speed and position control. Can also be configured for 0
to 10V, ±5V or 0 to 5V signal ranges.