5 drive replacement – step 4/4 – Doremi DCP-2000 User Manual
Page 26
Advertising
6.5 Drive Replacement – Step 4/4
When the drive has been registered, a confirmation message indicating that the SATA drive
replacement has been successfully completed will be displayed as illustrated below:
Note: The RAID rebuilding process can take between 2-4 hours to complete. It will largely
depend on the amount of content that resides on the drive/HDDs. During this time, the user may
engage in any other process, such as ingestion and playback.
Figure 39: Drive Replacement – Step 4/4
•
Click the Close button to go back to the Storage tab.
DTL.OM.000169.DRM
Page 26
Version 1.7
Doremi Cinema LLC
Advertising