Doremi GENeration3D - Manual (Page 12)

3 Generation 3D Front Panel Controller
Note: Throughout this section, the phrase “press Select” refers to pressing the front panel Menu
Wheel button of the Generation 3D (Figure 1).
3.1 Quick Setup Information
• Setting up the Generation 3D for a specific environment involves selecting three main
parameters:
1. Select the Pattern
2. Select the Output Interface
3. Select the Output 3D-mode
• The Generation 3D has many other parameters that can be changed and will be discussed
later in this manual, but the three parameters listed above are the most used.
G3D.OM.002067.DRM Page 12 Version 1.3
Doremi Labs