Doremi GENeration3D - Manual (Page 29)

6.4 Tabs Description
6.4.1 Input Tab
The "Input" tab is presented in Figure 13. The input tab shows the available patterns and can be
used to load patterns as well as to save custom patterns from your PC to the SD card in the
Generation 3D.
Doremi Universal Interface software can create custom patterns from the following image types.
• GIF, JPG, PNG, PNM, XBM, XPM, BMP and PPM.
6.4.1.1 Loading Patterns
• To load a pattern, select the 2D or 3D pattern from the Patterns List and press “Select.”
Figure 13: Doremi Universal Interface GUI – Loading Patterns
G3D.OM.002067.DRM Page 29 Version 1.3
Doremi Labs
Select Button
Add Button
Patterns List