Paxton Superchargers Dodge Viper RT/10 - Manual (Page 17)

5-1
P/N: 4809646
©2006 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
17FEB06 v2.0 92-96Viper(4809646v2.0)
Section 5
REPLACEMENT SHOCK TOWER SUPPORT INSTALLATION
A. Install the supplied shock tower brace onto
each shock tower with the chamfered corner
pointing forward. Use the factory bolt and
nut and the supplied bolt, nut and washer in
the top two holes.
B. Using a 13/32" bit, drill the forward-most
hole in each shock tower using the installed
parts as a template. (See Fig. 5-a.)
C. Install the supplied M10 x 25mm bolts
through the drilled holes and tighten using
the supplied nuts and washers. (See Fig.
5-b.)
***NOTE***
Bracket is slotted to provide supercharger pulley clear-
ance on different vehicles.
5. REPLACEMENT SHOCK TOWER
SUPPORT INSTALLATION
Fig. 5-a / Passenger’s side shock tower brace
Fig. 5-b / Driver’s side shock tower brace
FACTORY BOLT
TWO SUPPLIED x
25mm M10 BOLTS,
NUTS AND WASHERS