Xtramus NuDC-4U V2.1 - Manual (Page 15)

15
3. Install/Uninstall NuDC-4U
NuDC-4U comes with GUI (graphic user interface) utility software for setting test criteria and system
management. When NuDC-4U is connected with PC via a USB cable, you can set test criteria, save/view
testing logs, and upgrade NuDC-4U’s firmware/FPGA with NuDC-4U’s utility software.
However, before using NuDC-4U utility’s features and functions, you have to install it on your PC first.
Please see the table down below for PC’s system requirement for NuDC-4U Utility:
System Requirement for NuDC-4U Utility Software
OS
Windows XP Windows Vista
CPU 800MHz CPU 1.6 GHz, 32 bits (x86) CPU
RAM
256MB RAM 1GB RAM
HDD 20MB available space 20MB available space
NuDC-4U’s driver is contained in NuDC-4U’s utility software. Both NuDC-4U’s driver and utility software
will be installed at the same time. Please note that DO NOT connect your NuDC-4U to the PC via USB
cable before the installation.
Please follow the steps down below to install both NuDC-4U’s driver and utility software.
NuDC-4U Utility Software Installation
1. Double-click NuDC-4U installation program and
start the installation process.
2. InstallShield Wizard is starting to install
NuDC-4U. If you would like to cancel installation,
click “Cancel”.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®