Xtramus NuDC-4U V2.1 User Manual
Page 23
23
Function Descriptions – Setting
Alarm
(Continued)
•
Connection Mode:
NuDC-4U utility soft ware can send you e-mails if you
enable “Send E-mail alarms to an E-mail box” function. If you click the
“E-mail Box Settings” button after enabling this function, an E-mail Setting
window will pop up. Please note that your PC must have Internet access to
send alarm e-mails.
¾
POP3 Server Address:
Please input the POP3 server address of your
e-mail here in this field.
¾
E-mail Box Account/Password:
Please input your e-mail’s account
/password here in these fields.
¾
Sender’s E-mail Address:
Please input your e-mail address here.
¾
Destination E-mail Address:
Please input the e-mail address that you
would like to send the alarm e-mails to.
¾
E-mail Sending Interval (min):
You can set the time interval between
alarm e-mails here.
•
Buzzer Setting:
Click the Buzzer On check-box, NuDC-4U will buzz
whenever the DUT’s voltage/current meets the alarm criteria you set.
＊Please note that when switching NuDC-4U's connection mode under Parallel
Connection Mode, all Alarm settings will be DISABLED.
Trigger
You can configure several sets of
trigger condition with NuDC-4U utility
for tracing certain cases or errors.
Either Voltage, Current (ampere) or
Power (watt) can be configured as a
trigger condition. When the device
under test meets these conditions (or in
others words, equal to the value
configured in the trigger condition), the
trigger condition occurrence time will be
recorded in the log.
•
A:
Click the scroll-down menu to
choose Channel A/B/C/D.
•
B:
Click the scroll-down menu to
choose Voltage, Current, or Power.
•
C:
Click the scroll-down menu to set the condition (>= or <=) for the criteria
value you set in D.
•
D:
You can set the criteria value here.
•
E:
Click Add to add the setting you’ve set to the Trigger Table F down below;
or choose a trigger listed in Trigger Table F, and click Delete to delete it.
•
F:
The Trigger Table. All the criteria you’ve set will be displayed here.
Click OK to apply all the changes you’ve made, or click Cancel to exit.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®