Setting – Xtramus NuDC-4U V2.1 User Manual

Page 22

Advertising
background image


22

5.1.2. Setting

Function Descriptions – Setting

Alarm

When clicking Alarm on the Menu Bar, an Alarm Setting window will pop up,
allowing you to make test alarm configurations.

Ch_A/B/C/D:

Clicking the Ch_A/B/C/D menu tabs allows you to switch alarm

setting pages of Channel A/B/C/D.

Voltage/Current:

These two fields allow you to set alarm criteria for DUT’s

voltage

(Volt) and current (Ampere). Click Enable check- box to start

configuring alarm criteria. Click the scroll-down menu to set the condition for
the voltage/current threshold value you input:

¾

>=:

If DUT’s voltage/current value is greater or equal to the value you set

here, system will issue an alarm.

¾

<=:

If DUT’s voltage/current value is lesser or equal to the value you set

here, system will issue an alarm.

E-mail: [email protected]

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

®

Advertising