Xtramus NuDC-4U V2.1 - Manual (Page 34)

34
6. NuDC-4U Accessories/Maintenance
6.1. NuDC-4U Accessories
NuDC-4U has many different accessories available for different testing tasks. These accessories include:
NuDC-4U Accessories
Bare Wire Connection
ASSY-DC SC4S: Extension board for connecting DC devices with no connector.
The detection range of the current can be doubled if wires are fastened in parallel.
PoE Device
ASSY-DC POEA: Connection board for monitoring the power status of PD
(Powered Device) of PoE. (Power via Pin 1, 2, 3, 6) - Mode A
ASSY-DC POEB: Connection board for monitoring the power status of PD
(Powered Device) of PoE. (Power via Pin 4, 5, 7, 8) - Mode B
USB Device
ASSY-DC USBAB: Connection boards for monitoring USB devices’ power status
ASSY-DC JACK:
Connection boards for monitoring power status of devices with
different kinds of DC Jacks. Models for different sizes of DC Jack are shown below:
DC Jack Device
¾ ASSY-DC JACK065: ψ0.65mm
¾ ASSY-DC JACK165: ψ1.65mm
¾ ASSY-DC JACK235: ψ2.35mm
¾ ASSY-DC JACK13: ψ1.3mm
¾ ASSY-DC JACK20: ψ2.0mm
¾ ASSY-DC JACK25: ψ2.5mm
PCB and SMD
ASSY-DC:
Mini daughter board with two soldering conductors for soldering on PCB.
Models with different widths of conductors are shown below:
¾ ASSY-DC L1206
¾ ASSY-DC L0805
¾ ASSY-DC L0603
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®