Artesyn SCP-P4040-4G-ENP2 Installation and Use (August 2014) - Manual (Page 23)

Hardware Preparation and Installation
SCP-P4040-4G-ENP2 Installation and Use (6806800P60B) 23
This board is designed to operate with the input voltages and currents as defined in the
following tables.
2.2 Unpacking and Inspecting the Board
1. Verify that you have received all items of your shipment:
 Printed Quick Start Guide and Safety Notes
 SCP-P4040-4G-ENP2 Board
 Drivers CD
Table 2-3 Power Requirement (with solder-down memory chips)
State 12v VCC_RCT
Idle 2.81A 100 uA
Full Loading (Linux) 2.91A 100 uA
Table 2-4 Power Dissipation
Item Configuration Power
1 Total power dissipation (W) 34.92
Damage of Circuits
 Electrostatic discharge and incorrect installation and removal of the product can
damage circuits or shorten their life.
 Before touching the product make sure that you are working in an ESD-safe
environment or wear and ESD wrist strap or ESD shoes. Hold the product by its
edges and do not touch any components or circuits.