7 thermal management, Figure 4-4, Board thermal management – Artesyn SCP-P4040-4G-ENP2 Installation and Use (August 2014) User Manual
Page 37: Functional description
Advertising
Functional Description
SCP-P4040-4G-ENP2 Installation and Use (6806800P60B)
37
4.7
Thermal Management
SCP-P4040-4G-ENP2 provides a thermal management strategy.This includes CPU junction
temperature monitoring. The following diagram shows thermal management strategy:
A thermal diode is integrated in P40x0, which connects to a thermal sensor ADT7411. The CPU
can get the junction temperature via I2C.
When the junction temperature goes up to105oC, ADT7411 drives INT# to low, indicates an
interrupt to CPU. A red LED D17 can show the interrupt status.
Figure 4-4
Board Thermal Management
LED
Definition
Status
Description
D17
INT# signal is active
ON
The CPU temperature
goes up to 105 ° C
OFF
Normal status
Advertising