Avery Dennison SNAP Sonic Knife - Manual (Page 34)

Users Manual Sonic Knife w/500 Installation Instructions for Stacker Option 580028 •••• 34
Installation Instructions for
Stacker Option 580028
(Use with Woven Edge Fabrics less than 1 inch wide & over 4 inches long)
Option consists of:
Part No. Description Qty
588048 Web Guide 1
588049 Long Stacker Mount Shaft 2
Installation Procedure
1. Remove (2) Stacker Mounting Shafts from the Sonic Knife and replace with
(2) 588049 long Stacker Mount Shafts.
STACKER MOUNTING SHAFTS
SHAFTS & REPLACE WITH LONG
REMOVE STACKER MOUNTING
(588049)
2. Adjust to allow Stacker to slide freely.
3. With Stacker installed, slide forward and tilt top back as far as possible
without blocking the Platform “Drop” Sensor.