Cruise control lever, Storing the current speed – Dodge 2007 Sprinter User Manual

Page 149

Advertising
background image

148

Controls in detail

Driving systems

3

Cruise control lever

The cruise control lever is the uppermost

lever on the left of the steering column.

1 To store the current or a higher speed
2 To resume the last speed stored

3 To store the current speed or a lower

speed

4 To deactivate cruise control

Storing the current speed

̈ Accelerate/decelerate the vehicle to

the desired speed.

̈ Move the cruise control lever briefly

upward 1 or downward 3.

̈ Release the accelerator pedal.

Cruise control is activated.

The current speed is stored.

You cannot activate cruise control if:
ț you are driving under 20 mph

(30 km/h)

ț you are braking
ț you apply the handbrake and the 7

indicator lamp in the instrument cluster

is lit

ț ESP

®

or ASR is intervening and the yel-

low ASR/ESP

®

warning lamp flashes in

the instrument cluster

Resuming the stored speed

̈ Pull the cruise control lever briefly in

the direction of arrow 2.

̈ Release the accelerator pedal.

Cruise control is activated and adjusts
the vehicle’s speed to the last speed
stored.

i

Cruise control may be unable to main-

tain the stored speed on uphill or down-

hill gradients. The stored speed is

resumed if the gradient evens out and

the vehicle’s speed has not fallen below

20 mph (30 km/h).

N54.25-2925-31

Warning

G

Only resume the stored speed if you know
what this speed is and the current situation
is appropriate to do so. Otherwise, sudden
acceleration or braking could endanger you
or others.

i

When you pull the cruise control lever in

direction of arrow 2 for the first time

after starting the engine, cruise control

is switched on and the speed at which

you are currently driving is stored.

Advertising
This manual is related to the following products: