Dodge 2007 Sprinter - Manual (Page 309)

308
Practical hints
Changing bulbs
5
̈ Press catches 1 down.
̈ Swing housing cover 2 in the direc-
tion of the arrow and remove it.
3 Low-beam headlamps
4 Halogen high-beam headlamps/xenon
headlamp cornering lamp*
̈ Pull the connector off the bulb holder.
̈ Unclip the retainer spring and remove
the bulb.
̈ Insert the new bulb such that the base
locates in the recess of the bulb holder.
̈ Clip on the retainer spring and plug the
connector onto the bulb.
̈ Insert housing cover 2 into lower
brackets.
̈ Swing housing cover 2 toward head-
lamp casing.
̈ Pull first the inner and then the outer
catch 1 upward until it audibly engag-
es in place.
Turn signals
1 Bulb holder
̈ Turn bulb holder 1 and the bulb coun-
terclockwise and remove the holder.
̈ Press down on the bulb, turn it counter-
clockwise and remove it from bulb
holder 1.
̈ Press the new bulb into bulb holder 1
and screw it in clockwise.
̈ Place bulb holder 1 into the lamp and
turn it clockwise.
Parking lamps/side marker
1 Cap
̈ Turn cap 1 counterclockwise and re-
move it.
̈ Remove the bulb holder together with
the bulb.
̈ Pull the bulb out of the bulb holder.
̈ Press the new bulb into the bulb holder.
̈ Insert the bulb holder with bulb into the
reflector.
̈ Replace cap 1 and turn it clockwise to
the stop.