Dodge 2007 Sprinter - Manual (Page 308)

307
Practical hints
Changing bulbs
5
̈ Switch off the lighting.
̈ Open the hood (୴ page 185).
Bi-xenon headlamps*
High-beam headlamps, low-beam head-
lamps
1 Catches
2 Housing cover
Front bulbs
Bulb Model
1 Additional turn signal PY 16 W
2 Turn signal PY 21 W
3 Halogen headlamp:
low-beam headlamp
H7 55 W
Bi-xenon headlamp*:
low-beam headlamp/
high-beam headlamp
D1S-35 W
4 Halogen headlamp:
high-beam headlamp
H7 55 W
Cornering lamp*
(Canada only) H7 55 W
5 Foglamp* H11 55 W
6 Parking lamp/side
marker/standing
lamp (Canada only)
WY 5 W
Warning
G
Xenon bulbs carry a high voltage. You could
receive a serious or fatal electric shock if
you touch the electrical contacts on the xe-
non bulbs. Do not remove housing cover 2
(
୴ page 307) if the headlamps are xenon
headlamps.
Bulb Model Do not change xenon bulbs yourself.
Instead, always have them changed at an
authorized Sprinter Dealer which has the
necessary specialist knowledge and tools to
carry out the work required.
The manufacturer recommends that you use
an authorized Sprinter Dealer for this pur-
pose. In particular, work relevant to safety
or on safety-related systems must be car-
ried out at an authorized Sprinter Dealer.