Dodge 2007 Sprinter - Manual (Page 313)

312
Practical hints
Changing bulbs
5
License plate lamp W 5 W
1 Bulb holder with lens
2 Recess
̈ Insert a screwdriver or similar imple-
ment into recess 2 and carefully pry
off lens 1.
̈ Pull the bulb out of the bulb holder.
̈ Insert the new bulb.
̈ Align lens 1 and clip it in, making sure
that it engages.
Clearance lamp* W 5 W
(cargo and passenger vans only)
1 Securing screw
2 Lamp housing
̈ Undo screw 1 and remove lamp
housing 2 in the direction of the
arrow.
̈ Turn the bulb holder and remove it
together with the bulb.
̈ Pull the bulb out of the bulb holder.
̈ Press the new bulb into the bulb holder.
̈ Screw the bulb holder containing the
bulb into the lens.
̈ Replace lamp housing 2 in the oppo-
site direction to the arrow and retight-
en screw 1.
Side marker lamps* W 5 W
The lamps are mounted on the side of the
vehicle.
1 Lens
2 Bulb holder
̈ Insert a screwdriver or similar imple-
ment at the side and carefully pry off
lens 1 in the direction of the arrow.
̈ Turn bulb holder 2 in the direction of
the arrow and remove it together with
the bulb.
̈ Remove bulb 2 from the bulb holder.
̈ Press the new bulb into bulb holder 2.
̈ Screw bulb holder 2 together with the
bulb into the lens.
̈ On vans and crewbuses, reattach the
lens together with bulb holder 2.