Malfunction memory menu, No malfunctions, Malfunctions occurred – Dodge 2007 Sprinter User Manual
Page 96
95
Controls in detail
Operating system with steering wheel buttons*
3
̈ Press the è or ÿ button repeat-
edly until the settings for the CD being
played are displayed.
1 Current CD (with CD changer)
2 Current track
̈ Press the j or k button repeat-
edly until you have set the desired
track.
The Malfunction memory menu displays
malfunctions that may have occurred. The
message in the display depends on wheth-
er malfunctions have occurred or not.
̈ Press the è or ÿ button repeat-
edly until you see the corresponding
malfunction from the malfunction
memory in the display.
No malfunctions
The
No malfunctions
message appears if
no malfunctions have occurred.
Malfunctions occurred
If malfunctions have occurred, the number
of malfunctions will be displayed.
1 Number of malfunctions
̈ Press j or k button.
You can scroll through the malfunc-
tions one by one. The possible malfunc-
tions are described in the “Practical
hints” section (
Malfunction memory menu
Warning
G
The operating system only records and
shows malfunctions and warnings from cer-
tain systems. Therefore, make sure that
your vehicle is safe to use. You could other-
wise cause an accident by driving an unsafe
vehicle.
i
The malfunction memory is cleared
when you switch off the ignition. If any
new malfunctions occur, they will be
displayed again.
N54.32-2253-31