Dodge 2007 Sprinter - Manual (Page 312)

311
Practical hints
Changing bulbs
5
6 Tail lamp
7 Rear foglamp (driver’s side)
8 License plate lamp
9 Reverse lamp
̈ Switch off the lighting.
̈ Undo screws 1 and remove lens 2.
̈ Press the bulb into the bulb holder and
screw it out in a counterclockwise di-
rection.
̈ Press the new bulb into the bulb holder
and screw it in clockwise.
̈ Replace lens 2 and retighten
screws 1.
̈ Switch off the lighting.
Identification lamps W 5 W (cab chas-
sis only)
̈ Switch off the lighting.
̈ Undo screws 1 and remove lamp hou-
sing.
̈ Turn the bulb holder 2and remove it
together with the bulb.
̈ Pull the bulb out of the bulb holder 2.
̈ Press the new bulb into the bulb holder
2.
̈ Screw the bulb holder 2 containing
the bulb into the lamp housing.
̈ Carefully reattach the lamp housing
and retighten screws 1.
Changing additional bulbs
1 Securing screws
2 Bulb holder