Partition sliding door – Dodge 2007 Sprinter User Manual

Page 67

Advertising
background image

66

Controls in detail

Opening and closing

3

Deactivating the automatic locking
when driving function for the sliding
doors and the rear door

̈ Close all the doors.
̈ Turn the key to position 1 or 2 in the ig-

nition lock (

୴ page 67).

̈ Press lower part 2 of the switch. Keep

it pressed for approximately

5 seconds.
The indicator lamp in the switch flashes
twice.

The partition sliding door is in the partition

between the cab and the load compart-

ment.

Operating the partition sliding door
from inside the cab

1 To close
2 To open
3 To unlock

̈ To open: turn the key counterclock-

wise 3.
The sliding door is unlocked.

̈ Slide the sliding door to the right as far

as the stop 2.

̈ To close: slide the sliding door to the

left until it engages 1.
The sliding door can be locked using
the key.

Operating the partition sliding door
from inside the load compartment

1 To open
2 To close
3 To unlock

̈ To open: press the lever to the

right 3.
The sliding door is unlocked.

̈ Slide the sliding door to the left as far

as the stop 1.

̈ To close: slide the sliding door to the

right until it engages 2.

Partition sliding door*

Warning

G

Make sure that nobody can become trapped
as you close the partition sliding door.

Advertising
This manual is related to the following products: