Dodge 2007 Sprinter - Manual (Page 66)

65
Controls in detail
Opening and closing
3
Activating the automatic locking when
driving function for the entire vehicle
̈ Close all the doors.
̈ Turn the key to position 1 or 2 in the ig-
nition lock ( ୴ page 67).
̈ Press upper part 1 of the switch. Keep
it pressed for approximately
5 seconds.
The indicator lamp in the switch flashes
four times.
Deactivating the automatic locking
when driving function for the entire
vehicle
̈ Close all the doors.
̈ Turn the key to position 1 or 2 in the ig-
nition lock ( ୴ page 67).
̈ Press upper part 1 of the switch. Keep
it pressed for approximately
5 seconds.
The indicator lamp in the switch flashes
twice.
Activating the automatic locking when
driving function for the sliding doors
and the rear door
̈ Close all the doors.
̈ Turn the key to position 1 or 2 in the ig-
nition lock ( ୴ page 67).
̈ Press lower part 2 of the switch. Keep
it pressed for approximately
5 seconds.
The indicator lamp in the switch flashes
four times.
! CAUTION
If your vehicle is centrally locked, this
could hinder rescue operations from
the outside in the event of an accident.
When the automatic locking when driv-
ing function is activated, there is a risk
of being locked out if the vehicle is
pushed or towed.
For this reason, always deactivate the
automatic locking when driving func-
tion:
ț before pushing the vehicle
ț before having the vehicle towed
ț if you are only leaving the vehicle
for a brief period
i
The vehicle is locked automatically if
the ignition is switched on and the ve-
hicle is moving (default setting). For in-
formation about different settings,
please ask your authorized Sprinter
Dealer.
i
If activated, automatic locking is deac-
tivated if the vehicle is unlocked or
locked using the central locking switch.
Automatic locking is reactivated after
the ignition is switched off or a door is
opened with the vehicle stationary.