Dodge 2007 Sprinter - Manual (Page 74)

73
Controls in detail
Seats
3
Removing the head restraints
̈ Pull the head restraint up as far as it
will go.
̈ Press release button 1 and pull the
head restraint out.
Installing the head restraints
̈ Insert the head restraint so that the rod
with the notches is in the direction of
travel on the left.
̈ Push the head restraint down until it
engages.
The switches for the driver’s and co-
driver’s seat are on the center console.
1 Normal heating
2 Rapid heating
̈ Switch on the ignition (୴ page 67).
Normal heating
̈ To switch on: press upper part of the &
switch.
An indicator lamp in the switch comes
on.
̈ To switch off: press upper part of the &
switch again.
The indicator lamp in the switch goes
out.
Rapid heating
̈ To switch on: press lower part of the
switch.
Both indicator lamps in the switch
come on.
̈ To switch off: press lower part of the
switch again.
The indicator lamps in the switch go
out.
̈ To switch down to normal heating:
press upper part of the & switch.
! CAUTION
Make sure that the head restraint is re-
installed in such a way that its front fac-
es in the direction of travel (comfort
head restraint).
Seat heating*
N54.25-2918-31
i
The seat heating switches automatical-
ly to normal heating mode after approx-
imately 5 minutes.
Only one indicator lamp in the switch
remains lit.