Dodge 2007 Sprinter - Manual (Page 75)

74
Controls in detail
Seats
3
The folding seat is on the co-driver’s side.
Folding seat next to the partition sliding
door
1 Key for partition sliding door
2 Seat cushion
̈ Remove key 1 from partition sliding
door.
̈ Fold seat cushion 2 down or up.
The seat cushion is held in the relevant
position.
Folding seat*
Warning
G
When folding down the seat cushion, make
sure that nobody can become trapped.
The risk of injury to the co-driver is in-
creased in the event of sudden steering
movements or an accident if there is a key
inserted in the partition sliding door lock.
Remove the key from the partition sliding
door before using the folding seat.
Rear bench seat
Warning
G
All release levers on the legs of the rear
bench seat must be parallel to the vehicle
floor. A rear bench seat with 2 seats may
only be installed left-sided.
You can obtain information from any autho-
rized Sprinter dealer.
The integrated seat belt can only offer the
degree of protection for which it is designed
if you install the specified rear bench seats
correctly.
Keep the seat bench mounting cups in the
vehicle floor free from dirt and foreign
objects. This is the only way to guarantee
that the locking mechanisms will engage se-
curely.
For reasons of safety, only have seat mount-
ing cups retrofitted at an authorized Sprinter
dealer.