Dodge 2007 Sprinter - Manual (Page 76)

75
Controls in detail
Seats
3
Removing the rear bench seat
The locking lever is located underneath the
bench seat, on the feet of the bench seat.
1 Lever
̈ Turn all levers 1 for the bench seat
fully upward.
The rear bench seat moves back into
the seat mounting cups on the vehicle
floor.
̈ Lift the rear bench seat upward out of
the seat mounting cups.
Installing the rear bench seat
1 Lever
2 Seat mounting cups
̈ Observe the specified installation loca-
tion for the rear bench seat.
A rear bench seat with 2 seats may
only be installed left-sided.
̈ Check seat mounting cups 2 on the
vehicle floor.
Seat mounting cups 2 must be kept
free from dirt and foreign objects.
̈ Position the rear bench seat in the di-
rection of travel in respective seat
mounting cups 2.
̈ Slide the rear bench seat forward until
you hear the locking mechanisms en-
gage.
̈ Check levers 1 on the bench seat
feet.
All levers 1 must be parallel to the ve-
hicle floor.
i
Do not exceed the maximum permissi-
ble number of seats for passenger
vans.