Using the battery, Connection for the cigarette lighter, General operation – Becker TRAFFIC ASSIST Z217 User Manual

Page 18

Advertising
background image

18

>>>

GENERAL OPERATION

> D

> GB

> F

> I

> E

> P

> NL

> DK

> S

> N

> FIN

> TR

> GR

> PL

> CZ

> H

> SK

Using the battery

The internal power supply is via the inte-
grated rechargeable battery. The recharge-
able battery is maintenance-free and does
not require any particular care.

Connection for the cigarette

lighter

Connect the power supply via the vehicle
battery and the cable provided for the cig-
arette lighter as follows:
> Hold the connector of the connecting

cable and push it all the way into the
connecting socket on the Traffic Assist
or the connecting socket on the under-
side of the carrier plate without using
excessive force.

> Insert the adapter into the cigarette

lighter.

Note:
Note that if the battery is completely dis-
charged, it may take up to a minute be-
fore the device can be switched on again.

Note:
In the event of a defective battery, please
contact your authorised dealer. Please do
not attempt to remove the battery your-
self.

Note:
If the cigarette lighter has recently been
used and is still hot, wait until the lighter
socket has cooled down.

Note:
When the engine is switched off, the
power supply slowly discharges the vehi-
cle battery via the cigarette lighter!
Do not therefore operate the Traffic As-
sist for long periods with the engine
switched off.
TMC announcements can only be re-
ceived when the power supply is connect-
ed to the carrier plate.

Advertising