Becker TRAFFIC ASSIST Z217 - Manual (Page 66)

66
>>> NAVIGATION MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
• Volume
You can select the standard volume for
voice announcements for each start of
the Traffic Assist, or switch off voice an-
nouncements completely.
• Announce streets
Using the Announce streets button
you can switch the announcement of
the names of streets into which you are
to turn on (
) or off ( ).
• Announce ETA
Using the Announce ETA button you
can switch the automatic announce-
ment of the estimated time of arrival on
(
) or off ( ).
The Voice button
In the Voice settings window you can set
the voice that will make the navigation an-
nouncements for the language that has
been set.
> Press
Voice in the settings menu.
The Voice settings window appears.
> Select the desired voice.
A short example announcement is given.
> Confirm your selection by pressing the
OK button.
The Volume button
With the Volume settings window, you
can set the standard volume for voice an-
nouncements for each start of the Traffic
Assist, or switch off voice announcements
completely. Depending on the situation,
this setting can be fitted into the map dis-
play.
> Press
Volume in the settings menu.
The Volume settings window appears.
> Select the desired volume using the
and buttons.
> Press the button to switch off the
voice output completely.
> Confirm your settings by pressing the
OK button.
Note:
This function is not available for all lan-
guages/voices. If the function is not avail-
able, the button cannot be selected.
Note:
Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).