Becker TRAFFIC ASSIST Z217 - Manual (Page 52)

52
>>> NAVIGATION MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
> Select the start point or your current
position as the start point for route
guidance.
The individual stages are calculated.
A map of the stages will then be displayed.
> Press the Start button to start guidance
for this route.
You can call up the route options using
the
Options button.
You can optimise the order of the destina-
tions to be travelled to by pressing the
Optimise button.
By pressing the or button you
can simulate the entire route quickly or
slowly. You can stop the simulation by
tapping the screen.
You can use the
and buttons in
the bottom line to scroll through the indi-
vidual stages in the route. As you scroll,
each stage is shown.
Creating a new route
> In the route menu, press
Create new
route .
You can now enter an intermediate desti-
nation as described under “The destina-
tion input menu” on page 37 (
Enter
address , Select Point of Interest
Personal destinations , Contacts , Select
on map or Enter geo-coordinates ). You
also have the option of quickly selecting a
destination using the
Select from last
destinations button.
> In the input menu, press the Add but-
ton to accept the relevant intermediate
destination.
Note:
If a start point is selected, this is only used
to view a route.