Beisler 1225-5 - Manual (Page 16)

5.1.3 Fusing of knee lining and front trousers
Caution: Risk of burn!
Do not touch the area around the fusing station.
The lower stamp is very hot.
To avoid a displacement of the knee lining during the sewing process a
bonding point has to be set with the fusing station fusing the lining at
the correct position.
–
Position knee lining 3 under clamp 2.
– Press clamp key 1.
The clamp 2 lowers and clamps the knee lining.
The fusing tape 5 is pushed forward simultaneously and the
net-like fusing tape 8 is separated from the release paper.
– Position trousers part 7 and align as per the lining.
– Press fusing key 4.
The upper stamp 6 moves downwards, the lower heated stamp
moves upwards so that trousers part and lining are pressed with
the fusing tape lying in between.
After the preset fusing time the upper stamp 6 and clamp 2 are
lifted automatically and the lower stamp is lowered.
Lining and trousers part are fused now and can be fed for
overlocking.
12
7 6 5 4 3 2 1
8 5